Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
- Gear shifting box
   - 5-step manual box of gear shifting
      General information
      Replacement of epiploons of power shafts
      Check of a condition and replacement of a support of a transmission
      Removal and installation of draft of a drive of gear shifting
      Check and replacement of the sensor switch of fires of a backing
      Removal and RKPP installation
      Major maintenance of RKPP - the general information
   + 4-step and besstupenchaty automatic transmissions (ат and cvt)
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Check of a condition and replacement of a support of a transmission

 PERFORMANCE ORDER

1. To Poddomkratta a car front also establish it on props.

2. Get a sting of mount or a big screw-driver between the jet lever of a support and a frame and try to move assembly (see an accompanying illustration).

3. Vertical movement of the jet lever should not exceed 12.7÷19.0 mm, otherwise replace a support.
4. For replacement raise transmission by a jack and give bolts and nuts of fastening of a support.

At all do not perform any works under the car, withheld in the lifted situation by means of only one jack!


5. Installation is made upside-down.