Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of run or time in three months)
   Check of level of ATF AT/CVT (each 4 800 km of run or time in three months)
   Replacement of impellent oil and the oil filter (each 4 800 km of run or time in three months)
   Check of a condition and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
   Check, service and charging of the storage battery (each 12 000 km of run or time in 6 months)
   Condition check, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of run or time in 6 months)
   Check of a condition and replacement of the hoses located in an impellent compartment (each 12 000 km of run or time in 6 months)
   Check of a condition of components of system of cooling (each 12 000 km of run or time in 6 months)
   Rotation of wheels (each 12 000 km of run or time in 6 months)
   Check of brake system (each 12 000 km of run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of run or time in 12 months)
   Replacement of a filtering element of an air purifier (each 24 000 km of run or time in two years)
   Check of a condition of components of a power supply system (each 24 000 km of run or time in 12 months)
   Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of run or time in 6 months)
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and a distributor begunka (each 48 000 km of run or time in 24 months)
   Check and replacement of the valve of system of operated ventilation of a case (PCV) (each 48 000 km of run or time in 24 months)
   Replacement of the fuel filter (each 48 000 km of run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of run or time in 24 months)
   Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km of run or time in 24 months)
   Replacement of brake liquid (each 48 000 km of run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of run or time in 24 months)
   RKPP transmission oil replacement (each 48 000 km of run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


В нашей организации вы можете купить справка об обучении без предоплаты, имеются скидки.




Routine maintenance

General information

This Head was made to help on purpose to the owner of the car to support the vehicle in a condition of the maximum readiness for operation, receiving from it effective return with observance of requirements to profitability and safety.

At the beginning of Head the schedule of routine maintenance of the car is provided. Below the Sections devoted to a detailed statement of an order of performance of each of procedures of service separately are offered attention of the reader. Descriptions of visual checks, adjustments, procedures of removal and installation of components are included in a material of Sections, and also various good advice and recommendations. Given in the beginning of the Section of an illustration with the image of types of an impellent compartment, suspension brackets and a steering will help the reader to deal with placement on the car of components subject to service.

Serving the car according to the kilometrazhno-time schedule, and following the detailed recommendations provided below, the reader will receive the accurate action program which performance will provide long duration and reliability of service of its vehicle. Remember that this program is made on a complex basis and performance only with neglect others will not lead its separate points to desirable result.

In the course of service of the car the reader will soon be convinced that many procedures can, and should, to be united in the general groups in view of similarity of the nature or proximity of an arrangement of knots. For example, if the car for any reason is lifted over the earth, it is necessary to use a case and at the same time to check a condition of components of system of production of the fulfilled gases, a suspension bracket and a steering. Also, having hired a dinamometrichesky key, check effort of a tightening of all available carving fixture.

The first step of service of a vehicle always is self-preparation of the performer. Attentively familiarize with a material of the present Chapter, then make the list of components needing attention, prepare the necessary tool and outline the short plan of the forthcoming works. In case of emergence resistant to solution of problems address for the help to specialists of car-care center.


Typical top view of an impellent compartment of the Honda Civic models

1 — the Assembly block of safety locks
2 — the Storage battery
3 — the Fuel filter
4 — the Air purifier
5 — the GTTs Tank
6 — the Tank of liquid of washing of a windscreen
7 — the Tank of system of hydrostrengthening of a wheel (PAS)
8 — Shchup of measurement of level of impellent oil

9 — the Cover of a jellied mouth
10 — the Spark plug
11 — VV candle wires
12 — a radiator Cover
13 — a radiator Hose
14 — the Broad tank of system of cooling
15 — the Cover of the distributor of ignition


Typical type of an impellent compartment from below

1 — the Drain gate of a radiator
2 — the Support of the brake mechanism
3 — the Protective cover of the external CV JOINT of a power shaft
4 — the Drain stopper of the pallet of a case

5 — the Reception pipe of system of production of the fulfilled gases
6 — the Stopper ATF plum
7 — the Power shaft


Typical top view of an impellent compartment of the Acura Integra models

1 — the Assembly block of safety locks
2 — the Storage battery
3 — the Fuel filter
4 — the GTTs Tank
5 — the Tank of the main cylinder of coupling
6 — the Tank of liquid of washing of a windscreen
7 — the Tank of system of hydrostrengthening of a wheel (PAS)
8 — Spark plugs (under a cover)
9 — Shchup of measurement of level of impellent oil

10 — the Cover of a jellied mouth
11 — a radiator Cover
12 — a radiator Hose
13 — the Broad tank of system of cooling
14 — VV candle wires
15 — the Cover of the distributor of ignition
16 — the Air purifier
17 — the Assembly block of safety locks of ABS


The typical bottom view on a car back

1 — the Exhaust pipe
2 — the Fuel tank
3 — the Cable of a drive of the parking brake
4 — the Support of the brake mechanism

5 — the Exhaust silencer
6 — the Brake hose
7 — the Rack of a back suspension bracket