Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of run or time in three months)
   Check of level of ATF AT/CVT (each 4 800 km of run or time in three months)
   Replacement of impellent oil and the oil filter (each 4 800 km of run or time in three months)
   Check of a condition and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
   Check, service and charging of the storage battery (each 12 000 km of run or time in 6 months)
   Condition check, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of run or time in 6 months)
   Check of a condition and replacement of the hoses located in an impellent compartment (each 12 000 km of run or time in 6 months)
   Check of a condition of components of system of cooling (each 12 000 km of run or time in 6 months)
   Rotation of wheels (each 12 000 km of run or time in 6 months)
   Check of brake system (each 12 000 km of run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of run or time in 12 months)
   Replacement of a filtering element of an air purifier (each 24 000 km of run or time in two years)
   Check of a condition of components of a power supply system (each 24 000 km of run or time in 12 months)
   Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of run or time in 6 months)
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and a distributor begunka (each 48 000 km of run or time in 24 months)
   Check and replacement of the valve of system of operated ventilation of a case (PCV) (each 48 000 km of run or time in 24 months)
   Replacement of the fuel filter (each 48 000 km of run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of run or time in 24 months)
   Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km of run or time in 24 months)
   Replacement of brake liquid (each 48 000 km of run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of run or time in 24 months)
   RKPP transmission oil replacement (each 48 000 km of run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




94e743ed

Check of a condition and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)

 PERFORMANCE ORDER

1. The condition of assemblies of cleaners of a windscreen should be checked regularly according to the schedule of routine maintenance of the car (see. Schedule of routine maintenance). Brushes look round on existence of mechanical damages, signs of weakening of fastening of components and wear of rubber working elements.
2. On working surfaces of brushes the road film that leads to appreciable decrease in efficiency of functioning of screen wipers over time accumulates. Regularly wash out brushes cleaning solution of average concentration.
3. In the course of functioning of screen wipers there can be a gradual spontaneous otdavaniye of the fixture which reliability of a tightening also should be checked regularly.
4. At identification of cracks or signs of wear of rubber working elements replacement of brushes is made.
5. Take away the screen wiper lever from glass.

6. Wring out inside a lock uvula and carefully remove a brush from a hook on the lever end (see an accompanying illustration).

7. In need of replacement of a working element of a brush strongly compress lock uvulas on the brush end, then grasp an element and, having pulled, take it from a frame (see an accompanying illustration).

8. Take from a rubber working element metal holders and fill them in grooves of a new element (see an accompanying illustration).

9. Fill an element in a frame, having tracked reliability of a zashchelkivaniye of lock uvulas.
10. Put on a brush the lever of a screen wiper and fill it in a hook, having tracked reliability of a zashchelkivaniye of a lock uvula.