Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
- Routine maintenance
   Schedule of routine maintenance
   Specifications
   General information about settings and adjustments
   Check of levels of liquids (each 400 km of run or weekly)
   Check of a condition of tires and pressure of their rating (each 400 km of run or weekly)
   Check of level of liquid of the power steering (each 4 800 km of run or time in three months)
   Check of level of ATF AT/CVT (each 4 800 km of run or time in three months)
   Replacement of impellent oil and the oil filter (each 4 800 km of run or time in three months)
   Check of a condition and replacement of brushes of screen wipers (each 12 000 km of run or time in 6 months)
   Check, service and charging of the storage battery (each 12 000 km of run or time in 6 months)
   Condition check, adjustment of effort of a tension and replacement of driving belts, (each 12 000 km of run or time in 6 months)
   Check of a condition and replacement of the hoses located in an impellent compartment (each 12 000 km of run or time in 6 months)
   Check of a condition of components of system of cooling (each 12 000 km of run or time in 6 months)
   Rotation of wheels (each 12 000 km of run or time in 6 months)
   Check of brake system (each 12 000 km of run or time in 6 months)
   Check of a condition of seat belts (each 24 000 km of run or time in 12 months)
   Check and adjustment of gaps of valves (each 24 000 km of run or time in 12 months)
   Replacement of a filtering element of an air purifier (each 24 000 km of run or time in two years)
   Check of a condition of components of a power supply system (each 24 000 km of run or time in 12 months)
   Check of level of the RKPP transmission oil (each 24 000 km of run or time in 12 months)
   Survey of components of a suspension bracket and steering drive, check of a condition of protective covers of power shafts
   Check of a condition of components of system of production of the fulfilled gases (each 9600 km of run or time in 6 months)
   Check of a condition and replacement of spark plugs
   Check of a condition and replacement of VV of candle wires, covers and a distributor begunka (each 48 000 km of run or time in 24 months)
   Check and replacement of the valve of system of operated ventilation of a case (PCV) (each 48 000 km of run or time in 24 months)
   Replacement of the fuel filter (each 48 000 km of run or time in 24 months)
   Check and adjustment of turns of idling (each 48 000 km of run or time in 24 months)
   Service of system of cooling (an oporozhneniye, washing and filling) (each 48 000 km of run or time in 24 months)
   Replacement of brake liquid (each 48 000 km of run or time in 24 months)
   Replacement of liquid of automatic transmission (AT/CVT) (each 48 000 km of run or time in 24 months)
   RKPP transmission oil replacement (each 48 000 km of run or time in 24 months)
   Dumping of the counter of the indicator of intervals of service
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment





Replacement of the fuel filter (each 48 000 km of run or time in 24 months)

Remember that gasoline is inflammable liquid in the highest measure – at work with components of a power supply system observe all taken measures of fire safety. Do not smoke and do not come nearer to a venue of works with open fire or unprotected by the lamp shade carrying. Do not make system service in the room equipped with working at natural gas and heating devices equipped with a control torch (such as водогреи and dryers for clothes). Do not forget that gasoline is among the cancerogenic substances promoting development of a cancer, – try not to allow hits it on open sites of a body, use protective rubber gloves, carefully wash out hands warm water with soap at casual unforeseen contact to fuel. Immediately collect the spilled fuel and do not put the rags impregnated with a fuels and lubricants near sources of open fire. Remember that the power supply system equipped with injection of fuel of models constantly is under pressure. Before starting a detachment of fuel lines, dump residual pressure in system (for more details see. Head of the Power supply system and release). At service of components of a power supply system put on goggles. Constantly hold near at hand the class B fire extinguisher!


 PERFORMANCE ORDER

1. To start performance of procedure follows only after complete cooling (not less than three hours later after an engine stop).
2. The fuel filter is located in an impellent compartment on its back partition.
3. Dump pressure in a power supply system (see. Head of the Power supply system and release).

4a. Enclose under the filter paper towels for collecting spilled fuel. Give a hollow bolt of shtutserny connection.

4b. Turn out the carving union.

4с. Weaken a coupling bolt and take the filter from an impellent compartment (see accompanying illustrations).


Whenever possible at a detachment of the fuel line use a special cap natural a cutting head.


5. Installation is made upside-down. Do not forget to change sealing washers from both parties of a hollow shtutserny bolt which it is necessary then to tighten with demanded effort. Track reliability of a tightening of the carving union. Start the engine and attentively examine the filter on existence of signs of leaks.