Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
- Gear shifting box
   + 5-step manual box of gear shifting
   - 4-step and besstupenchaty automatic transmissions (ат and cvt)
      General information
      Problem diagnostics AT/CVT - the general information
      Check and adjustment of a cable of management by a butterfly valve in the kick-down mode (TV cable) - the Integra models
      Replacement and adjustment of a cable of gear shifting
      Adjustment and replacement of the sensor switch of position of the lever of the selector of transfers
      Blocking system - the general information, condition check, replacement and adjustment of an electromagnet of management
      Check and replacement of electromagnetic valves of management with blocking
      Removal and installation of 4-step and besstupenchaty automatic transmissions (AT and CVT)
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




94e743ed

Check and replacement of electromagnetic valves of management with blocking

Check

Electromagnetic valve of management of blocking

 PERFORMANCE ORDER

1. Disunite the electric socket of assembly of the electromagnetic valve of management of blocking (see an accompanying illustration).

2. Measure resistance between each of socket plugs (from the valve) and weight. Compare results of measurements to requirements of Specifications. In case of need replace valve assembly.
3. Serially connect each of socket plugs to a positive pole of the battery, – distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, it is necessary to drive away the car on car repair shop for carrying out full-scale diagnostics of ESM and contours of electromagnetic valves.

Electromagnetic valve of management of gear shifting blocking

 PERFORMANCE ORDER

1. Disunite the electric socket of the electromagnetic valve of management of gear shifting blocking (see an accompanying illustration).

2. Measure resistance between each of socket plugs (from the valve) and weight. Compare results of measurements to requirements of Specifications. In case of need replace valve assembly.
3. Serially connect each of socket plugs to a positive pole of the battery, – distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, it is necessary to drive away the car on car repair shop for carrying out full-scale diagnostics of ESM and contours of electromagnetic valves.
4. Serially connect each of socket plugs to a positive pole of the battery, – distinctly heard click accompanying operation of each of valves should be distributed. If click it is not audible, it is necessary to drive away the car on car repair shop for carrying out full-scale diagnostics of ESM and contours of electromagnetic valves.

Replacement

To make replacement only one of electromagnetic valves in an individual order it is not obviously possible. All klapanny assembly (the valve of management of blocking and the valve of management of gear shifting blocking) is subject to replacement.


 PERFORMANCE ORDER

1. Give fixing bolts and remove klapanny assembly (see an accompanying illustration).

2. Carefully wipe interfaced surfaces and clean маслотоки.
3. Replace sealing laying and establish new klapanny assembly on the regular place. Tighten fixing bolts with demanded effort.
4. Check the electric socket on existence of signs of pollution and oxidation, in case of need clean and again connect.
5. Check serviceability of functioning of electromagnetic valves of management (see above).