Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal, repair and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Replacement of boots of drum-type brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Check of a condition and replacement of brake lines and hoses
   Pumping of brake system
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Cable replacement (ов) drive of the parking brake
   Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
   Check of serviceability of functioning and replacement of the sensor switch of level of brake liquid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




94e743ed

Specifications

General parameters

Characteristic

Value

Pedal of a foot brake

 

   Free wheeling, mm

 

      Civic

1.6÷4.8

      Integra

1.6÷5.2

   Height, mm

 

      Models with RKPP

 

         Civic

153.2

         Integra

160.3

      Models with AT/CVT

 

         Civic

160.3

         Integra

165.1

Course of the lever of the parking brake

See. Head Routine maintenance

Gap between a pusher of the vacuum amplifier and the GTTs piston (at depth of depression in 508 mm of mercury. on the amplifier), mm

0.0÷0.5

Disk brake mechanisms

Characteristic

Value

Minimum admissible thickness of brake shoes

See. Head Routine maintenance

Minimum admissible thickness of a disk

See marking on a disk

Maximum admissible size of differences of thickness of a disk (overlapping), mm

0.015

Maximum admissible palpation of a disk, mm

0.102

Drum-type brake mechanisms

Characteristic

Value

Minimum admissible thickness of frictional overlays of brake boots

See. Head Routine maintenance

Maximum admissible internal diameter of a drum

See marking on a drum

Efforts of a tightening of carving connections, Nanometer

Connection type

Value

Hollow bolt of shtutserny knot of connection of a brake hose to a support of the brake mechanism (forward and back)

34

Bolts of a forward support

 

   Civic (see identification marking on the support case)

 

      Type 5410 support

33

      Type 2056 support

34

         Top bolt

34

         Bottom bolt

27

   Integra

 

      Models вып. since 1994 on 1997 g

31

      Models вып. since 1998.

33

Bolts of fastening of an anchor bracket of a forward support

108

Bolts of a back support

56

Nuts of fastening of wheel cylinders

9.5

Nuts of fastening of the vacuum amplifier of brakes

12.2

Nuts of fastening of GTTs

14.9