Honda Civic/Acura Integra

since 1994 of release

Repair and car operation

Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) - the general information and codes of malfunctions
   Replacement of brake shoes of disk brake mechanisms
   Removal, repair and installation of supports of disk brake mechanisms
   Condition check, removal and installation of a brake disk
   Replacement of boots of drum-type brake mechanisms of back wheels
   Removal and installation of wheel cylinders
   Removal and installation of the main brake cylinder
   Check of a condition and replacement of brake lines and hoses
   Pumping of brake system
   Check of serviceability of functioning/tightness, removal and installation of assembly of the vacuum amplifier of brakes
   Adjustment of the parking brake
   Cable replacement (ов) drive of the parking brake
   Check of serviceability of functioning, replacement and adjustment of the sensor switch of stoplights
   Check of serviceability of functioning and replacement of the sensor switch of level of brake liquid
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Adjustment of the parking brake

PERFORMANCE ORDER

1. Remove the handle from the gear shifting lever (see. Head gear shifting Box).
2. Remove the central console (see. Head Body).
3. Prop up protivootkatny boots forward wheels, then поддомкратьте a back of the car and establish it on props. On one click cock the lever of the parking brake.

4. Manually rotating back wheels, tighten clockwise an adjusting nut on assembly of the equalizer of a hummock drive of the parking brake (see an accompanying illustration). Stop a nut tightening as soon as wheels will start to "be taken". Release the lever of the parking brake and make sure that back wheels rotate freely. At the correct adjustment of a drive the course of a control lever of the parking brake should correspond stipulated in Specifications to Head Routine maintenance of the real Management.

5. Lower the car on the earth, then establish into place the central console (see. Head the Body) and the handle of the lever of gear shifting (see. Head gear shifting Box).