Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
- Engine
   + engine Repair without extraction from the car - the Civic models
   + engine Repair without extraction from the car - the Integra models
   - General and major maintenance of the engine
      General information
      Check of pressure of oil
      Check of kompressionny pressure in cylinders
      Diagnostics of a condition of the engine with use of the vacuum gage
      Removal from the car of the power unit - preparation and precautionary measures
      Removal and engine installation
      Alternative versions of schemes of regenerative repair of the engine
      Order of dismantling of the engine by its preparation for major maintenance
      Dismantling of a head of cylinders
      Cleaning and check of a condition of a head of cylinders
      Service of valves
      Assembly of a head of cylinders
      Removal of shatunno-piston assemblies
      Removal of a cranked shaft
      Cleaning of the block of the engine
      Check of a condition of the block of the engine
      Honingovaniye of mirrors of cylinders
      Check of a condition of components of shatunno-piston group
      Check of a condition of a cranked shaft
      Check of a condition and selection of loose leaves of radical and shatunny bearings of a cranked shaft
      Engine assembly order
      Installation of piston rings
      Installation of a cranked shaft and check of working gaps of radical bearings
      Replacement of a back epiploon of a cranked shaft
      Installation of shatunno-piston assemblies and check of size of working gaps in shatunny bearings of a cranked shaft
      Trial start and engine running in after major maintenance
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


94e743ed



Engine assembly order

Before starting engine assembly, make sure available all necessary details, materials and tools to which number the following belongs:

   a) Standard set of the metalwork tool;
   b) A Dinamometrichesky natural a drive on 1/2-dyuymv;
   c) The tool for putting on of piston rings;
   d) The tool for a staving of piston rings;
   e) Short pieces of a fuel hose for putting on on hairpins of covers of shatunny bearings;
   f) Measuring set of Plastigage;
   g) Set щупов lezviyny type;
   h) A file with small tooth;
   i) Fresh impellent oil;
   j) Assembly impellent or greasing on the basis of a molybdenum disulphate;
   k) Prokladochny hermetic;
   l) Hermetic for fixing of carving connections.

With a view of economy of time and minimization of volume of arising problems make engine assembly in the following order:

 PERFORMANCE ORDER

a) Shatunno-porshnevye assemblies (engines B18C1, В18С5, D16Y5, D16Y7 and D16Y8);
b) Cranked shaft and radical bearings;
c) A back epiploon of a cranked shaft with the holder;
d) Shatunno-porshnevye assemblies (B18B1 engine);
e) Maslootrazhatel of the case pallet;
f) The oil pump with a maslozabornik;
g) Case pallet;
h) Head of cylinders;
i) Camshaft (ы) and assembly of yokes;
j) Water pump;
k) A gas-distributing belt with cogwheels of a drive of GRM;
l) Inlet pipeline and final collector;
m) Sections of a forward cover;
n) Cover of a head of cylinders;
o) Flywheel / driving disk.