Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
- clutch and power shafts
Specifications
Coupling - the general information and check of a condition of components
Removal and installation of the main cylinder of coupling
Removal and installation of the executive cylinder of coupling
Air removal from a hydraulic path of a drive of switching off of coupling
Removal, check of a condition and installation of components of assembly of coupling
Check of a condition and replacement of the directing bearing
Removal, check of a condition and installation of the vyzhimny bearing and fork of switching off of coupling
Adjustment of a pedal of coupling
Condition check, replacement and adjustment of the sensor switch of disconnection of a chain of a starter
Removal and installation of power shafts
Removal and installation of an intermediate shaft (Integra model)
Replacement of protective covers and check of a condition of CV JOINTS
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Specifications
Coupling
|
Characteristic |
Value |
|
Nominal height of a pedal of coupling, mm |
165 |
|
Free wheeling of a pedal of coupling, mm |
12÷19 |
|
Working course of a pedal of coupling, mm |
130÷140 |
Power shafts
|
Characteristic |
Value |
|
Length of a power shaft, mm |
|
|
Civic |
|
|
Left shaft |
774.7÷779.5 |
|
Right shaft |
500.1÷505.6 |
|
Integra |
480.2÷480.2 |
| Distance from the internal CV JOINT to a damper of dynamic loadings, mm |
|
| Civic |
|
| Left shaft |
|
| With SR1 marking |
76.2 |
| Not marked SR1 |
93.7 ± 2.8 |
| Right shaft |
56.0 ± 2.8 |
| Integra |
25.4 |
Efforts of a tightening of carving connections, Nanometer
|
Connection type |
Value |
|
Bolts of fastening of assembly of a basket of coupling |
26 |
|
Stupichny nut/nut of fastening of a power shaft |
182 |
|
Bolts of fastening of the bearing bearing of an intermediate shaft |
39 |
|
|
