Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
- Maintenance instruction
   Arrangement and functions of governing bodies
   Keys and locks
   Adjustment of seats
   The equipment and governing bodies in salon
   Heater and air conditioner
   Control system of a salon microclimate
   Audiosystem
   Safety systems
   Running in of the new car
   Cowl unlocking
   The valve of shutdown of supply of fuel in case of failure (on some models)
   Engine start
   Five-step manual box of gear shifting
   Automatic transmission
   Besstupenchaty variator (separate models)
   Devices of external lighting and trailer alarm system
   Check of level of liquid in automatic transmission
   Driving belts
   Emergency closing of the panel of the hatch of a roof
   Safety locks
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




94e743ed

Adjustment of seats

Adjustment of forward seats


Before beginning movement, adjust the provision of a seat. To adjust the longitudinal provision of a seat, raise the lever of a clamp located in front under a pillow of a seat. Holding the lever, shift a seat forward or back in situation convenient for you. Then release the clamp lever. For check of reliability of fixing of a seat try to shift it forward and back.

To change a tilt angle of a back of a seat, raise the lever of a clamp located sideways on the basis of a pillow of a seat (from a door). Holding the lever, bring a back into convenient situation, then release the clamp lever.

Thus the back will be fixed in new situation.

CARS WITH THE 3-DOOR BODY THE HATCHBACK

For ensuring convenience of landing of passengers on a back seat and their exit from the car of a back of forward seats can bend forward. Handles of release of clamps are located sideways on backs of seats (from doorways).

CARS WITH THE 5-DOOR BODY THE HATCHBACK

Adjustment of an inclination of a back of a forward seat is carried out by means of the rotating handle (back) which is located sideways on the basis of a seat pillow.

The big inclination of a back of a seat worsens protective properties of a seat belt. At failure you can dive under a belt and get serious traumas. During movement on the car bring a back into vertical situation. Sit down so that your back completely leaned on a seat back.

Adjustment of height of a pillow of a seat of the driver (separate models)


The pillow of a driver's seat can be regulated on height. Adjustment is made by rotation of a regulator which is located at the left on the basis of a seat pillow.

Electric adjustment of a seat of the driver (separate models)

Your car can be equipped with a driver's seat with electric drives of adjustment. Two switches of electric adjustment are located at the left on the basis of a seat pillow. The combined switch with the long horizontal handle is intended for adjustment of longitudinal and vertical provision of a seat, and the switch with the short vertical handle – for adjustment of an inclination of a back.

The seat can be adjusted at any provision of a key in the ignition lock. Before beginning movement, adjust the provision of a seat.


Press the handle of the combined switch forward or back to move up or distance a seat from a steering wheel and management pedals.


Press up or down for the forward end of the handle of the combined switch to raise or lower a first line of a pillow of a seat. Similarly press up or down for the back end of the handle of the combined switch to raise or lower a back part of a pillow of a seat.


To raise or lower a seat pillow entirely, press up or down the central part of the handle of the switch.


Adjust an inclination of a back of a seat, rejecting in the relevant party the vertical handle of the switch which is located behind the combined switch.

The big inclination of a back of a seat worsens protective properties of a seat belt. At failure you can dive under a belt and get serious traumas. During movement on the car bring a back into vertical situation. Sit down so that your back completely leaned on a seat back.

Head restraints


On forward seats of your car head restraints are established. On some updatings of the car head restraints are established also on a back seat. Head restraints help to prevent injuries of a neck and the head. In order that head restraints could execute the protective functions, they should be correctly adjusted. The top part of a pillow of a head restraint should be flush with the upper edge of an auricle.

On some updatings of the car possibility of adjustment of head restraints on height is provided. Adjustment of a head restraint is made by two hands at the same time therefore it is not necessary to try to adjust a head restraint during car movement. To lift a head restraint, simply pull it up. Unlike it for lowering of a head restraint it is necessary to press the clamp button previously.

Head restraint dismantle or replacement is made for cleaning as follows. Lift a head restraint up to the end. Then press the button of a clamp and remove a head restraint from a seat back.

Car operation without head restraints can bring in a failure case to a serious travmirovaniye of the driver and passengers.
Check existence of head restraints on the places and adjust their situation properly.

Folding of a back of a back seat (separate models)

The back of a back seat is executed separate, and consists of two parts which can develop forward, opening direct access to a luggage carrier. Clamps of a back of the back seat, locking it in normal situation, can be released both from car salon, and from a luggage carrier.

Each of two sections of a back back can develop forward irrespective of another.


Turn the handle фиксато

ра clockwise to combine the left section, or counter-clockwise, to combine the right section of a back.


To combine a back of a back seat from a luggage carrier, pull for clamps which are located under the back shelf.

After return of sections of a back of a back seat to normal situation strongly press them in the direction to the back shelf to fix on a place. Check reliability of inclusion of clamps of a back back, having pulled for the upper edge of a back on itself. After return of a back of a back seat to vertical situation check, that straps of both diagonal and zone belts settled down over a back.

Be convinced of that all things which are in a luggage carrier or act from a luggage carrier in car salon, are reliably adhered. The loose luggage can dart off and injure the driver and passengers in case of emergency braking of the car.

CARS WITH THE 3-DOOR BODY THE HATCHBACK


To combine sections of a back of a back seat (at the same time or separately), lift the button of a clamp which is located from above on each section.

CARS WITH THE 5-DOOR BODY THE HATCHBACK


Before putting back sections, turn a pillow of a back seat in vertical situation so that it rose behind forward seats. For this purpose use a loop attached to back edge of a pillow of a seat. Take out head restraints from a back and insert them probes into the openings executed in the basis of a pillow of a seat. Then combine sections of a back of a back seat.

It is not necessary to move with an open trunk lid and the combined back of a back seat, thus there is a possibility of poisoning with carbon monoxide (WITH).