Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
   Removal, installation and adjustment of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and dashboard installation
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment




94e743ed

Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back

 PERFORMANCE ORDER

1. Open a door of a back and take plastic clamps of fastening of the panel internal upholsteries.

Latch

 PERFORMANCE ORDER

1a. Remove a decorative cover.

1b. Turn out screws of fastening of assembly of a latch (see accompanying illustrations).

2. Disconnect an executive rod, disunite electric sockets, then remove a latch.
3. Installation is made upside-down.

Lock cylinder

 PERFORMANCE ORDER

1. Turn out a bolt of fastening of the cylinder to a back door (see an accompanying illustration).

2. Disconnect an executive rod, develop the cylinder and take it from the door panel.
3. Installation is made upside-down.

Emphasis

 PERFORMANCE ORDER

1. Open a door of a back and prop up it in the top situation.

2. Having hooked a small screw-driver, remove clamps of fastening of the top end of an emphasis. Having sharply pulled for an emphasis, disconnect it from the car (see an accompanying illustration).

3. Remove a decorative cover, give the bottom fixing bolt (see an accompanying illustration) and remove an emphasis.

4. Installation is made upside-down.