Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
   Removal, installation and adjustment of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and dashboard installation
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment





Removal and installation of an internal upholstery of doors

Considered in the real Management of the car are equipped with safety cushions (SRS). At performance of any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of Head Onboard electric equipment).

If the stereosystem established on the car is equipped with a security code before disconnecting the storage battery make sure that have the correct combination for audiosystem input in action!


 PERFORMANCE ORDER

1. On models with a manual drive of window regulators remove the lowering handle / поднимания flew down (see an accompanying illustration).

2. Remove the internal handle of a door (see. Removal and installation of latches and cylinders of locks and external and internal handles of doors).

3a. Turn out screws of fastening of the panel of an internal upholstery (see accompanying illustrations).

3b. Removal of an overlay of the handle of an armrest of a door.

3с. Reversing of the back screw of fastening of the handle of an armrest.

3d. Reversing of the forward screw of fastening of the handle of an armrest.

3e. Then, accurately hooking the clamps located on perimeter, separate the panel from a doorframe (see an accompanying illustration).

4. Slightly raise the panel and disunite electroconducting sockets.
5. For the purpose of ensuring access to a door frame accurately hook clamps and remove the plastic insulating screen.
6. Return into place the plastic insulating screen. Before installation of the panel of an internal upholstery do not forget to make sure available on the places of all provided clamps (some from a bottom could drop out in the course of panel dismantle).
7. At the corresponding complete set restore initial connection of electroconducting of a uniform lock/drive of a window regulator. Press the panel to a door and accurately latch lateral clamps. Screw fixing screws. At the corresponding complete set establish into place assembly of the switch of the door lock. Establish the handle of a manual drive of a window regulator.