Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
Specifications
Care of components of a body and car bottom
Care of vinyl elements of furnish
Care of an upholstery and salon carpets
Repair of insignificant damages of body panels
Repair of seriously damaged body panels
Service of loops and car locks
Replacement wind and other fixed glasses
Removal, installation and adjustment of provision of a cowl
Removal and installation of a latch of the lock of a cowl and cable of its drive
Removal and installation of assemblies of forward and back bumpers
Removal and installation of forward wings
Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
Removal, installation and adjustment of a door of a back
Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
Removal, installation and adjustment of a cover of a luggage compartment
Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
Removal and installation of an internal upholstery of doors
Removal, installation and adjustment of provision of doors
Removal and installation of latches and cylinders of locks and external and internal handles of doors
Removal and installation of door glasses
Removal and installation of a regulator of a window regulator
Removal and installation of rear-view mirrors
Removal and installation of the central console
Removal and dashboard installation
Removal and installation of a casing of a steering column
Removal and installation of an instrument guard
Removal and installation of a forward fairing
Removal and installation of seats
+ Control body sizes
+ Onboard electric equipment
|
Removal and installation of the central console
|
|
Considered in the real Management of the car are equipped with safety cushions (SRS). At performance of any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of Head Onboard electric equipment). |
|
|
1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action! |
|
|
Back section of the console
|
|
|
|
1. Having hooked, remove a decorative cover and turn out lobbies of the screw of fastening of back section of the console (see an accompanying illustration). |
|
|
2a. Turn out the fixing screws located on either side of back section of the console (see accompanying illustrations). |
|
|
2b. On some models for ensuring access to screws of fastening of back section of the console it is simpler to shift forward forward section. |
3. Pull up the lever of the parking brake. Remove back section of the console, having lifted it up and having handed over back. |
|
Forward section of the console
|
|
1. Remove the handle from the gear shifting lever (see. Head gear shifting Box).
|
|
2a. Give screws of fastening of forward section of the console (see accompanying illustrations). |
|
|
2b. … and also along a first line. |
|
|
3. Having given fixture, pull back edge of section up and back and remove it via the gear shifting lever (See an accompanying illustration). Disconnect electroconducting and remove the console from the car. |
4. Installation is made upside-down. |
|
|
|
