Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
Specifications
Care of components of a body and car bottom
Care of vinyl elements of furnish
Care of an upholstery and salon carpets
Repair of insignificant damages of body panels
Repair of seriously damaged body panels
Service of loops and car locks
Replacement wind and other fixed glasses
Removal, installation and adjustment of provision of a cowl
Removal and installation of a latch of the lock of a cowl and cable of its drive
Removal and installation of assemblies of forward and back bumpers
Removal and installation of forward wings
Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
Removal, installation and adjustment of a door of a back
Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
Removal, installation and adjustment of a cover of a luggage compartment
Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
Removal and installation of an internal upholstery of doors
Removal, installation and adjustment of provision of doors
Removal and installation of latches and cylinders of locks and external and internal handles of doors
Removal and installation of door glasses
Removal and installation of a regulator of a window regulator
Removal and installation of rear-view mirrors
Removal and installation of the central console
Removal and dashboard installation
Removal and installation of a casing of a steering column
Removal and installation of an instrument guard
Removal and installation of a forward fairing
Removal and installation of seats
+ Control body sizes
+ Onboard electric equipment
|
Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
Lock latch
|
|
1. Open a cover of a luggage compartment and lead round a marker a latch of its lock for the purpose of simplification of procedure of installation it into place.
|
|
2. Give a bolt and a nut of fastening of a zamkovy latch (see an accompanying illustration). |
|
|
3. Remove a latch and disconnect a driving cable and electroconducting (see an accompanying illustration). |
4. Installation is made upside-down. |
|
Lock cylinder
|
|
1. Open a luggage carrier. Through a special opening in a cover also disconnect from the lock cylinder a driving cable.
2. Turn the lock cylinder on 90 ° counter-clockwise for the purpose of combination of lock uvulas of a clamp with reciprocal grooves. Having pulled the cylinder on itself, take it from a cover of a luggage compartment.
3. Installation is made upside-down. |
|
Cover emphasis
|
|
1. Lift a cover of a luggage compartment and reliably fix it in open situation.
2. Having turned out two fixing bolts, отсо едините the top end of an emphasis.
3. Having hooked a small screw-driver, remove a decorative cover, then turn out a bolt of fastening of the bottom end of an emphasis and remove the last from the car.
4. Installation is made upside-down. |
|
|
|
