Honda Civic/Acura Integra

since 1994 of release

Repair and car operation

Removal, installation and adjustment of a cover of a luggage compartment

The cover of a luggage compartment has considerable weight therefore it will be reasonable to secure with the help of the assistant.

Removal and installation

PERFORMANCE ORDER

1. Lift a cover and cover with protective covers or simply old blankets of edge of an aperture of a luggage compartment for the purpose of protection of a paint and varnish covering.
2. Disconnect the driving cables brought to a cover or electroconducting.

3. Lead round a loop marker, having marked situation them on a cover (see an accompanying illustration).

4. Ask the assistant to hold a cover in open situation and give fastening bolts to it both loops (see an accompanying illustration). Together carefully uncover the car.

5. Installation is made upside-down.

Track, that loops appeared located strictly in the former provisions on a cover.

Adjustment

PERFORMANCE ORDER

1. Cover adjustment in a body aperture is made by weakening of fixture of loops.
2. For the purpose of control of size of shift of a cover lead round loops a marker (see paragraph 3 above).
3. Weaken fixture and correct the provision of a cover in the corresponding direction. Adjustment should be made the short steps, each time tightening fixture and making control check, accurately closing a cover.
4. Make sure of serviceability of functioning of the lock of a cover. In case of need make adjustment of position of its drummer. Try to achieve, that the lock reliably held a cover when it is aflush with surrounding body panels. Lead round the drummer a marker, weaken fixture and make necessary adjustment. Do not forget to tighten bolts reliably.
5. Assembly of a zamkovy latch, no less than a loop of a cover should be greased regularly with greasing on a lithium basis.
6. In summary correct height of provision of a cover in the closed condition – as appropriate screw/turn out persistent rubber pillows.