Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Specifications
   Care of components of a body and car bottom
   Care of vinyl elements of furnish
   Care of an upholstery and salon carpets
   Repair of insignificant damages of body panels
   Repair of seriously damaged body panels
   Service of loops and car locks
   Replacement wind and other fixed glasses
   Removal, installation and adjustment of provision of a cowl
   Removal and installation of a latch of the lock of a cowl and cable of its drive
   Removal and installation of assemblies of forward and back bumpers
   Removal and installation of forward wings
   Removal and installation of a latch, cylinder of the lock and emphasis of a door of a back
   Removal, installation and adjustment of a door of a back
   Removal and installation of a latch, cylinder of the lock and emphasis of a cover of a luggage compartment
   Removal, installation and adjustment of a cover of a luggage compartment
   Driving cables of an otpuskaniye of locks of covers of a luggage compartment and hatch of a jellied mouth of a fuel tank
   Removal and installation of an internal upholstery of doors
   Removal, installation and adjustment of provision of doors
   Removal and installation of latches and cylinders of locks and external and internal handles of doors
   Removal and installation of door glasses
   Removal and installation of a regulator of a window regulator
   Removal and installation of rear-view mirrors
   Removal and installation of the central console
   Removal and dashboard installation
   Removal and installation of a casing of a steering column
   Removal and installation of an instrument guard
   Removal and installation of a forward fairing
   Removal and installation of seats
   + Control body sizes
+ Onboard electric equipment





Removal and installation of an instrument guard

Considered in the real Management of the car are equipped with safety cushions (SRS). At performance of any works near sensors of blows, a steering column or the dashboard disconnect SRS (see schemes of electric connections at the end of Head Onboard electric equipment).


 PERFORMANCE ORDER

1. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for audiosystem input in action!


2. Remove a steering wheel (see. Head Suspension bracket and steering).
3. Remove the central console (see. Removal and installation of the central console.
4. Remove facing of an instrument guard (see. Removal and dashboard installation).
5. Remove a combination of devices (see. Head Onboard electric equipment).
6. Remove all sections of the dashboard (see. Removal and dashboard installation).
7. Give fixture (nuts and bolts) the assembly block of safety locks and the handle of an otpuskaniye of the lock of a cowl (see. Removal and installation of a latch of the lock of a cowl and cable of its drive and Head Onboard electric equipment).

8. Give fixing nuts and lower a steering column (see an accompanying illustration).

9a. Turn out fixing screws.

9b. Having hooked a screw-driver, liberate from the dashboard deflectors of air lines (see accompanying illustrations).

10. Having hooked a screw-driver, remove forward overlays of door thresholds.

11. Turn out lateral screws of fastening of assembly of an instrument guard (see an accompanying illustration).

12. Remove a radio tape recorder (see. Head Onboard electric equipment) and assembly of management by a heater (see. Head of System of cooling and heating).

13. Turn out the bottom screws in the central part of an instrument guard (see an accompanying illustration).

14. Turn out bolts of fastening of the upper edge of a guard to a partition of an impellent compartment.
15. Pull a guard on itself and disconnect from it all electroconducting.
16. Through a steering column remove a guard from the car.
17. Installation is made upside-down.