Honda Civic/Acura Integra

since 1994 of release

Repair and car operation

Check of serviceability of a condition and replacement of the sensor of speed of movement of the car (VSS)

Check

PERFORMANCE ORDER

1. Disunite the socket of a plait of electroconducting of the sensor. By the voltmeter measure tension on the socket (see an accompanying illustration). Identification of the plug of a wire of a food can be made according to schemes of electric connections (see. Head Onboard electric equipment). On the socket tension of the battery should take place. If a food is absent, check a condition of electroconducting of VSS on a site between the sensor and the assembly block of safety locks. By means of an ohmmeter check conductivity existence between the plug of a black wire of the socket and weight. If conductivity is absent, check a condition of a black wire and quality of its terminal connections. 2. To Poddomkratta a car front also establish it on props. Prop up protivootkatny boots back wheels and transfer transmission to neutral situation. Connect to VSS electroconducting, include ignition and test the voltmeter the plug of an alarm wire from a reverse side of the socket (negative щуп connect to mass of a body). Holding one wheel motionless, manually повращайте opposite – tension should fluctuate in limits from zero to 5 In, otherwise replace VSS.

Replacement

PERFORMANCE ORDER

1. Disconnect from VSS electroconducting. 2. Turn out a fixing bolt and remove the sensor from transmission. 3. Installation is made upside-down.