Honda Civic/Acura Integra

since 1994 of release

Repair and car operation

Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
- Power supply system and release
   Specifications
   Sbrasyvaniye of pressure in a power supply system
   Check of serviceability of functioning of fuel pump/pressure of fuel
   Check of a condition and replacement of fuel lines and their shtutserny connections
   Removal and installation of the fuel pump
   Check of a condition and replacement of the sensor of fuel consumption
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of assembly of an air purifier
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of injection
   Removal and installation of the case of a throttle
   Removal and installation of a regulator of pressure of fuel
   Removal and installation of the fuel highway and injectors of fuel of injectors of fuel
   Release system - the general information
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment

Specifications

General parameters

Characteristic	Value
Pressure of fuel (at single turns of the engine), ^kgf/cm2
Civic
With the connected vacuum hose of a regulator	2.0÷2.5
With the disconnected vacuum hose of a regulator	2.7÷3.2
Integra
B18B1 engine
With the connected vacuum hose of a regulator	2.2÷2.5
With the disconnected vacuum hose of a regulator	2.8÷3.3
The B18C1 engine for 1997 вып.
With the connected vacuum hose of a regulator	2.7÷3.2
With the disconnected vacuum hose of a regulator	3.4÷3.9
B18C1 engine
With the connected vacuum hose of a regulator	2.7÷3.2
With the disconnected vacuum hose of a regulator	3.3÷3.8
Resistance of an injector of injection of fuel, Ohm
Civic	It is not stipulated (but should not be zero or infinite)
Integra
1994 and 1995	10÷13
with 1996	It is not stipulated (but should not be zero or infinite)
Resistance of the fuel level sensor, Ohm
Civic (the sensor is fixed by a nut)
Full tank	3.5÷5.0
Half filled tank	25.5÷39.5
Empty tank	105÷108
Civic (the sensor is fixed by a lock ring)
Full tank	2.0÷5.0
Half filled tank	25.5÷39.5
Empty tank	105÷110
Integra
Full tank	2.0÷5.0
Half filled tank	29.5÷35.5
Empty tank	105÷110

Efforts of a tightening of carving connections, Nanometer

Characteristic	Value
Service bolt of an injector of injection
Bolt on 6 mm
Civic 1996	11.8
Integra with 1994 on 1996	14.9
Hollow bolt on 12 mm (all models)	34
Bolts/nut of fastening of the case of a throttle
Integra 1994 and 1995	19.0
All other models	22
Nuts of fastening of the fuel highway	12.2