Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
- Power supply system and release
   Specifications
   Sbrasyvaniye of pressure in a power supply system
   Check of serviceability of functioning of fuel pump/pressure of fuel
   Check of a condition and replacement of fuel lines and their shtutserny connections
   Removal and installation of the fuel pump
   Check of a condition and replacement of the sensor of fuel consumption
   Removal and installation of a fuel tank
   Cleaning and repair of a fuel tank - general information
   Removal and installation of assembly of an air purifier
   Removal, installation and adjustment of a cable of an accelerator
   System of electronic injection of fuel (EFI) - the general information
   Check of serviceability of functioning of system of injection
   Removal and installation of the case of a throttle
   Removal and installation of a regulator of pressure of fuel
   Removal and installation of the fuel highway and injectors of fuel of injectors of fuel
   Release system - the general information
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment




94e743ed

Removal and installation of a regulator of pressure of fuel

See preventions at the beginning of Sbrasyvaniye of pressure in a power supply system.


 PERFORMANCE ORDER

1. Dump pressure in a power supply system (see Sbrasyvaniye pressure in a power supply system).
2. Disconnect a negative wire from the battery.

If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that have the correct combination for equipment input in action!


3a. Disconnect from a pressure regulator vacuum and fuel hoses, then turn out fixing bolts (Civic).

3b. Fixing bolts (Integra).

4. Remove a pressure regulator.
5. Installation is made upside-down. Do not forget to replace a sealing ring which before installation it is necessary to grease with pure impellent oil slightly.
6. Check the engine on existence of signs of leakages of fuel.