Honda Civic/Acura Integra

since 1994 of release

Repair and car operation



Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ Cцепление and power shafts
+ Brake system
- Suspension bracket and steering
   Specifications
   Removal and installation of assembly of the forward shock-absorber with a screw spring
   Replacement of the shock-absorber or screw spring of rack-mount assembly of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross-section stability with basic plugs
   Removal and installation of the top control lever of a forward suspension bracket
   Removal and installation of the bottom control lever of a forward suspension bracket
   Removal and installation of a rotary fist and stupichny assembly
   Removal and installation of assembly of a forward nave with the wheel bearing
   Replacement of spherical support
   Removal and installation of assembly of the back shock-absorber with a screw spring
   Removal and installation of a bar of the back stabilizer of cross-section stability with basic plugs
   Removal and installation of assembly of a back nave with the wheel bearing
   Removal and installation of levers of a back suspension bracket
   Removal and installation of a steering wheel
   Removal and installation of tips of steering drafts
   Replacement of protective covers of the steering mechanism
   Removal and installation of the steering mechanism
   Removal and installation of the steering pump
   Air removal from a hydraulic path of system of strengthening of a wheel
   Wheels and tires - the general information
   Corners of installation of wheels
+ Body
+ Onboard electric equipment





Removal and installation of tips of steering drafts

Removal

 PERFORMANCE ORDER

1. Weaken nuts of fastening of the corresponding wheel. To Poddomkratta a car front also establish it on props. Remove a wheel.

2a. Holding a draft tip from a provorachivaniye the second key, release a lock-nut.

2b. Unscrew a nut so that there was a possibility to put a label of provision of a tip on open rounds of a carving of a bar (see accompanying illustrations).

3. Take шплинт and weaken a nut of a spherical finger of a tip. It is not necessary while finally to remove a nut.

4. By means of a stripper liberate a sharovy finger of a tip from the lever of assembly of a rotary fist (see an accompanying illustration). Remove a nut and separate draft from a fist.

5. Turn on and remove a tip from draft.

Installation

 PERFORMANCE ORDER

1. Screw on draft a new tip (to put in the course of dismantle to a landing label on rounds of a carving of a bar). Plant a sharovy finger of a tip in the lever of a rotary fist. Do not tighten while a tip lock-nut.
2. Screw a koronchaty nut of a spherical finger and tighten it with demanded effort. Fix a nut new the shplinty.
3. Strongly tighten a tip lock-nut.
4. Establish a wheel, lower the car on the earth and tighten wheel nuts with demanded effort (see. Specifications to Head Routine maintenance).
5. Drive away the car in a specialized workshop for check of corners of installation of forward wheels.