Flasks of lamps of halogen type are filled with the gas which was under pressure and at sharp stirring can blow up. Try to take such lamps only for a socle and use goggles. Remember that at a flask contact naked fingers on glass there are fatty spots that leads to a premature exit of a lamp out of operation as a result of an overheat. Before installation wipe a lamp flask alcohol.
PERFORMANCE ORDER
1. Open a cowl.
2. Disunite located under block headlight assembly the electric socket, then remove a rubber protective cover (see an accompanying illustration).
3a. On the Civic models release a wire clamp of fastening of the lamp boss (see an accompanying illustration).
3b. Having pulled, take a cartridge from a block headlight.
4. On the Integra models turn a cartridge counter-clockwise and take it from a block headlight together with a lamp (see an accompanying illustration).
5. Installation is made upside-down (see the prevention at the beginning of the Section).