Honda Tsivik
+ Honda Civic and Acura Integra brand Cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ cooling and heating Systems
+ Power supply system and release
+ engine Electric equipment
+ Control systems of the engine
+ gear shifting Box
+ clutch and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
- Onboard electric equipment
General information and precautionary measures
Search of causes of failures of electric equipment
Safety locks - the general information
Chain breakers
The relay - the general information and check of serviceability of functioning
Check of serviceability of functioning and replacement of the breaker of indexes of turns / alarm system
Check of serviceability of functioning and replacement of podrulevy switches
Check of serviceability of functioning and replacement of the switch of ignition and lock of blocking of a steering column
Check of serviceability of functioning and replacement of switches of the dashboard
Check of serviceability of functioning of measuring instruments of a combination of devices
Removal and installation of a combination of devices
Removal and installation of a radio receiver and loudspeakers
Removal and installation of the aerial of a radio receiver
Replacement of lamps of head headlights
Adjustment of the direction of optical axes of head headlights
Replacement of block headlights
Replacement of lamps
Running fires of light time of day (DRL)
Check of serviceability of functioning and replacement of the electromotor of a drive of screen wipers
Check of serviceability of functioning and replacement of a horn of a horn
Check of serviceability of functioning and regenerative repair of a heater of back glass
Control system of speed (темпостат) - general information and check of serviceability of functioning
The electric drive of window regulators - general information and check of serviceability of functioning
The uniform lock - general information and check of serviceability of functioning
The electric drive of external rear-view mirrors - general information and check of serviceability of functioning
Safety cushions - the general information
+ Schemes of electric connections - the general information
|
Replacement of lamps
Forward indexes of turns / parking fires and marker lights
Civic models
|
|
1. For replacement of the left lamp (from the driver) at the started engine turn out wheels against the stop to the right, then switch off ignition. The right lamp changes at the wheels turned out to the left.
2. Release a clamp and remove a loker of the corresponding wheel arch.
3. Turn a lamp cartridge on 1/4 turns counter-clockwise and take it from a casing of assembly of a lamp. Press a lamp in a cartridge, turn it on 1/8 turns counter-clockwise, then pull outside and liberate from cartridge assembly. Installation is made upside-down. |
|
Integra
|
|
|
|
1a. Give fixing screws and take lamp assembly from the panel of a wing of the car (see accompanying illustrations). |
|
|
1b. Turn a cartridge on 1/8 turns counter-clockwise and take it from a casing of lantern assembly. |
2. Take a lamp from the boss.
3. Installation is made upside-down. |
|
Back marker lights and stoplights
|
|
1. Open a cover a luggage carrier/door of a back and remove a decorative cover of the corresponding back lamp.
|
|
2a. Turn a lamp cartridge counter-clockwise and take it from a casing of lantern assembly (see accompanying illustrations). |
|
|
2b. An arrangement of lamps of the back combined lamp on the Integra models (the decorative cover is removed). |
3. Press a lamp in a cartridge, turn counter-clockwise and take outside.
4. Installation is made upside-down. |
|
Stoplights of the top level
Civic
|
|
1. Remove decorative covers (if they are provided) two fixing screws, give the last and remove assembly of a stoplight of the top level from the body panel.
2. Turn a cartridge counter-clockwise and take it from a casing of lantern assembly. Having pulled, take a lamp.
3. Installation is made upside-down. |
|
Integra
|
|
|
|
1. Open a luggage carrier, having provided with that access to a stoplight of the top level (see an accompanying illustration). |
2. Turn a lamp cartridge counter-clockwise and liberate it from lantern assembly.
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of devices
|
|
1. Remove a combination of devices (see. Removal and installation of a combination of devices).
|
|
2. Turn a lamp cartridge counter-clockwise from assembly of a combination of devices (see an accompanying illustration). |
3. Having pulled outside, take a lamp from the boss.
4. Installation is made upside-down. |
|
Illumination of registration plate
|
|
1. Turn out two fixing screws and remove a lens of a lamp of illumination of registration plate.
|
|
2. Turn a lapovy cartridge counter-clockwise and take it from lantern assembly (see an accompanying illustration). |
3. Having pulled outside, liberate a lamp from the boss.
4. Installation is made upside-down. |
|
Internal lamps (salon, luggage compartment)
|
|
|
|
1. Having accurately hooked a screw-driver, remove a lens from the corresponding lamp. |
2. Liberate a lamp from spring plugs. If there is a need for a lamp poddevaniye, get the lever only under edges of socles of a lamp in order to avoid flask damage.
3. Installation is made upside-down. |
|
|
|
